Out of stock
Jeti Duplex EX R14 2.4GHz Receiver w/ Telemetry
$189.99
(No reviews yet)
Write a Review
Jeti Duplex EX R14 2.4GHz Receiver w/ Telemetry
| Receiver | Duplex EX R14 |
|---|---|
| Manufacturer | Jeti Model |
| Special Features | Spread-Spectrum/Frequency Hopping |
| Modulation | 2.4GHz w/Telemetry Data |
| Upgradeable | Via USB or JetiBox |
| Satellite Rx Support | Yes/2 |
| Channels | 14 |
| Range | Full Range |
| Voltage | 3.2-8.4V (2S Li-poly) |
| Dimensions | 62mm x 38mm x 16mm |
| Weight | 30g |
Duplex revolutionary, fully digital 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech Republic. Full line of Duplex EX receivers is part of the most advanced radio system on today's market. Every receiver comes with programmable failsafe and digital telemetry.
One of the most attractive features of the Duplex 2.4GHz line of products is the full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real time information (see video).
With any of the Duplex 2.4GHz receiver you can simultaneously monitor all of your sensor data using the Duplex JetiBox Profi or Jeti 2.4GHz Transmitters.
More information (links):
* Instruction Manual (.pdf)
* Click Here for Firmware Updates
Port Configurations (Rx Firmware 3.20):
Standard: 1-14 Servo, SAT2 Satellite In/Out, SAT1 Satellite In, Ext Telemetry/USB Programming
PPM/Servo: 1-14 Servo, SAT2 PPM, Ext Telemetry/USB Programming
EX Bus/Servo: 1-14 Servo, SAT2 Satellite In/Out, SAT1 Satellite In, Ext EX Bus/USB Programming
UDI/Servo: 1-14 Servo, SAT2 UDI, Ext Telemetry/USB Programming
One of the most attractive features of the Duplex 2.4GHz line of products is the full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real time information (see video).
With any of the Duplex 2.4GHz receiver you can simultaneously monitor all of your sensor data using the Duplex JetiBox Profi or Jeti 2.4GHz Transmitters.
More information (links):
* Instruction Manual (.pdf)
* Click Here for Firmware Updates
Port Configurations (Rx Firmware 3.20):
Standard: 1-14 Servo, SAT2 Satellite In/Out, SAT1 Satellite In, Ext Telemetry/USB Programming
PPM/Servo: 1-14 Servo, SAT2 PPM, Ext Telemetry/USB Programming
EX Bus/Servo: 1-14 Servo, SAT2 Satellite In/Out, SAT1 Satellite In, Ext EX Bus/USB Programming
UDI/Servo: 1-14 Servo, SAT2 UDI, Ext Telemetry/USB Programming
Related Products
-
-
Out of stock
-
Out of stock
-
Out of stock
