Name： CORVUS RACER 540 100CC
Item No：A-G100006
Specs：
WING SPAN: 108" (2740mm)
LENGTH: 99" (2510mm)(not including spinner)
WING AREA: 2111sq in (136.2sq dm)
FLYING WEIGHT: 25.3-28lbs (11500-12800g)
ENGINE: 100cc-120cc gas
RADIO: 4CH/6-9S
Engine: 100-120cc
EME120
GP123
Motor: Hacker Q80-6L
Servos:
BEST
7x MKS 777 Servos, 1x Savox SC-1252MG for throttle + Graupner 5.9V 5A Voltage Controller
GOOD
7x Savox SA-1270TG, 1x Savox SC-1252MG for throttle + Graupner 5.9V 5A Voltage Controller
OK
6x Savox SA-1231SG, 1x Savox SA-1230SG, 1x Savox SC-1252MG for throttle + Graupner 5.9V 5A Voltage Controller
Extensions:
2x 48" Heavy Duty
2x 24" Heavy Duty
1x 18" Heavy Duty
2x 12" Heavy Duty
Spinner: 4.5"
Servo Arms
6-10 x 2" Servo Arms
0-1 x 4" Double-Side Servo Arm
Prop:
Falcon 29 x 9 Carbon Gas Propeller
Adhesives: Thin & Medium CA, 5-30min Epoxy or Gorilla Glue
Description:
carbon landing gear;
carbon tailwheel;
carbon wing tube;
carbon 4" spiner;
dual carbon stab tubes;
Genuine Ultracote;
pre-finished canopy hatch with tinted canopy;
aluminum braced motor box with pre-installed firewall;
4-40 ball link hardware;
phenolic horns;
pre-hinged wings and stabs;
removable rudder,stabs;
used with transparant.
SOLD WITH EME 120 ENGINE
EME 120 engines include: NSK bearings, Walbro Carb, Ported cylinder head design, Pre-installed throttle arm that is USABLE! with correct linkage geometry, Better reed block and intake design, Genuine RC EXL igniton
18 month warranty on engines bought from Pro-RC
Shipping not included for Warranty.
Specifications:
Displacement: 120 cc
Weight: 5.19 lbs on our scale: 5.97 lb. with Stock Mufflers and Ignition Engine - Engine -5.3lb (2400g), Muffler - .35lb (160g), Ignition - .3lb (160g)
RPM Range: 1,100-7,200
Output: 12.2 hp @ 7,000 rpm
Requires: unleaded gasoline (91~93 octane), oil (35:1), ignition battery (4.8-6v) & propeller
Includes: electronic ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs
Suggested Propellers: 28x10, 28x12, 29x10 (3-blade: 27x12)
Technical Data: Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
Compression Ratio: 7.6:1
Gas/Oil Mix: 30:1 ~ 35:1
