Sale

Graupner MZ-18 9 Channel 2.4GHz HoTT 3.5" TFT LCD Transmitter

SKU:
s1005.1
$680.00 $602.00
(No reviews yet)
Weight:
10.00 LBS
Width:
30.00 (cm)
Height:
20.00 (cm)
Depth:
20.00 (cm)
Current Stock:

Out of stock

Out of Stock

Overview 

  Graupner mz-18 HoTT 2.4GHz 9 Channel transmitter is designed with Graupner's unique telemetry technology that supports Bi-directional data transmission to give user the real-time information. The use of up to  75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. Through the telemetry function, you may check receiver's consumption voltage, temperature and also program the telemetry data. By using optional sensor, brushless control +T ESC, or HoTT sensor module, you may check the real-time data such as RPM, voltage, current, temperature, and warning in transmitter. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone  who needs a high quality 9 channel radio.
 


Key Features

  • HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
  • The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to
    external interference.
  • 3.5" Full color TFT Touch LCD with specialized touch panel and user friendly interface
  • Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
  • Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and
    sensor board (General air module, General engine module)
  • real-time telemetry analysis for Optional Brushless Control Telemetry ESC such as RPM, consumption
    current, voltage, ESC temperature, Warning
  • Advanced HoTT wired/wireless trainer system

  • SUMD, SUMO functions ensures the convenient use of gyro and control board

  • Selectable 10ms, 20ms of the signal repetition time for the use of analogue and digital servos
  • Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
  • High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
  • Standard micro SD Memory cards to share model setup, expand model memeory
  • 30 model memories
  • Model copy function for model memories
  • Graupner Firmware update through GR STUDIO PC Software


 
Programming options 

  • 30 model memories(Available to expand model memory, using SD card)
  • 6 Q.link functions
  • 3 Model types(Helicopter, Airplane, Glider)



Helicopter Function

  • Q.link function x 6
  • 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
  • Pitch Curves (7-point)
  • Throttle Curves(7-point)
  • Pitch, Throttle Trim function x 6
  • Swash Limit function
  • Swash mix function
  • Program mixing x 8(Liner Program mixing x 5, Curve mixing x 3)
  • Throttle mixing function(AILE>>THRO, ELEV>>THRO, RUDD>>THRO)



Airplane Function

  • Q.link function x 6
  • 8 wing type(Delta wing included)
  • 3 tail type
  • Wing mixing(RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
  • Throttle Curve function
  • Program mixing x 8(Liner Program mixing x 5, Curve mixing x 3)
  • Snap roll function
  • Aileron Diff function
  • Flap sett function
  • Airbrake function
  • Idle Low function

Glider Function

  • Q.link function x 6
  • 8 wing type(Delta wing included)
  • 3 tail type
  • Wing mixing(RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
  • Program mixing x 8(Liner Program mixing x 5, Curve mixing x 3)
  • Aileron Diff function
  • Flap MIX function(FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
  • Flap sett function
  • Butterfly function



Includes

  mz-18 transmitter
  USB PC interface set
  USB interface adaptor wire
  2000mAh NiMH battery
  Transmitter Chager
  GR-24L receiver
  GR-12L receiver
  USB Cable
  USB adapter wire
  Neckstrap
  Manual



Graupner HoTT Features

  • Simple, extremely fast binding
  • Range test and warning function
  • Low-voltage warning
  • Failsafe, free channel allocation (channel mapping): mixer functions and all servo settings can be programmed
    simply on transmitter LCD by using telemetry function

  • Binding of any number of receivers for channel expansion (max. of 32 channels)
  • SUMD, SUMO functions ensures the convenient use of peripherals through gyro and control board
  • Maximum immunity to interference through optimized frequency hopping and broad channel spread
  • Intelligent data transmission with correction simultaneously
  • Future-proof through update capability via USB interface
  • Extremely fast rebinding, even at max. distance
  • Telemetry analysis in real time
  • Over 200 systems can be used simultaneously

  • Graupner Firmware update through GR STUDIO PC Software

 

Specifications

 

Operating Voltage

3.3 ~ 6.0V

Battery

NiMH 4cell  2000mAh

Current consumption

About 510.0mA

Controller

32bit  micro controller

Radio Frequency band

2.4000 ~ 2.4835 GHz

Radio Modulation

FHSS

Temperature rang

About -10 ~ +55`C (-50 ~ +131`F)

Antenna

Dipole Antenna

Control Channel

9CH

Display

3.5" TFT LCD W/Touch screen

Telemetry function

Internal LCD, External Smart box

Telemetry announce

Speaker and earphone

Toggle switch

8ea

UI Interface

LCD display touch

Slide lever

2ea

Quick link

10

Model memory

30

SD-card

Optional SD card

Battery charge

DC Jack

Firmware upgrade

USB Terminal

Trainer Function

Wired/ wireless

Dimensions

194.0 x 286.1 x 111.6 mm (7.64 x 11.26 x 4.39 oz)

Weight

838.8g (29.59 oz)