Graupner Brushless Control + T60 G3.5
Graupner
Overview
This is Graupner BRUSHLESS CONTROL +T 60 BEC telemetry ESC. Featuring simple programming setup for telemetry data, Integrated HoTT system gives you real-time information
on Motor RPM, voltage, consumption current, ESC temperature, user programmable warning. Graupner BRUSHLESS CONTROL +T 60 is capable of up to 70 amps continuous current when using 2 to 6 series LiPo battery packs. With the use of the optional Graupner HoTT transmitter, ESC can be programmed by wireless at real time. Equipped with Cool FET technology and multi protection system (Temperature, Low-voltage cut off, Over-current),this ESC can be protected from any damage.
Key Features
• Available to use HV Servo and High-efficient HV BEC system(Adjustable voltage of 0.2V steps, 5.0~8.0V)
• Supporting HoTT telemetry with simple programming setup
• Real-time information on RPM, voltage, temperature, user programmable warning by HoTT telemetry system
• Smooth throttle response
• Perfectly compatible with 2~28 pole motor
• Inrunner/Outrunner motor available
• Forward/Reverse function (Boat, Car)
• Updatable firmware with GR STUDIO PC Software
• Multi protection system (Temperature, Low-voltage cut off, Over-current)
ESC features(Helicopter type)
• Model type/Battery type/Cut-off type
• Motor timing and turning direction, Speed up type
• Starting torque, Governor speed, Governor response speed
• Governor On/Off, Motor pole and gear ratio, BEC voltage adjustable
ESC features(Airplane type)
• Model type/Battery type/Cut-off type
• Motor rotation direction/Motor timing/Speed up type
• Starting torque, A-brake, Min-brake, Max-brake
• Brake type/Motor pole and gear ratio/BEC voltage adjustable
Includes
BRUSHLESS CONTROL +T 60 ESC
RESERVOIR CAPACITOR FOR SPEKTRUM RECEIVE
Manual
Specs
Cell count (LiPo) |
2~6 |
|
Operating Voltage |
6~25V DC |
|
Continuous current (2.4 Ah) |
60A |
|
max. current 10s |
70A |
|
Over current. Protection |
80A |
|
PWM frequency |
32kHz |
|
BEC continuous current |
3A |
|
BEC current max |
10A |
|
BEC voltage |
5~8V (0.2V STEP) |
|
BEC short circuit protection |
Yes |
|
False start protection |
Yes |
|
Overtemp. Protection |
Yes |
|
Low voltage cutoff |
Yes |
|
updatable firmware |
Yes |
|
Dimensions(mm) |
55x30x10mm |
2.16x1.18x0.39 in |
Weight |
Approx 69g |
2.43 oz |